43000-150-10 DC Power Supply

Description

These instruments have been designed for burn-in applications such as DC-DC converters, power inverters, notebook computers, battery chargers and many other types of electronic devices. Modern power factor correction circuitry is incorporated in 43000 providing an input power factor above 0.98 to meet the IEC requirements. This PFC correction circuitry not only reduces the input current draw but also greatly reduces generation of input current harmonics.

Why Buy?

• Very Cost Effective with High Power Density and Low Current Ripple

Features

• N+1 Redundancy
• High Power Densities
• Hot-Swappable Maintenance
• Remote ON/OFF
• Programmable Control Via the CAN Bus
• 1350W to 1500W per Module
• Voltage Range: 1V to 150V
• Current Range: 10A to 90A
• 0.1% FS Line Regulation
• 1% FS Load Regulation
• 1% FS Programming Accuracy
• 1% FS Measurement Accuracy
• AC Input Power Factor >.98 at Full Load
• Operating Temperature 0-50˚ C
• Humidity Range 0~90% RH. Non-Condensing
• 3V Max. Line Loss Compensation
• Turn On Over Shoot Voltage 5% of Nominal Output
• Transient Response Time <5 ms
• Remote I/O Control

43000-150-10 DC MODULAR POWER SOURCE

AC Input Voltage

Protection Function