Client LoginContact UsShopping Cart
HOME
Toll Free: (800) 253-1230
Intl: (978) 461-2100
Fax: (508) 229-2045
QuadTech

Hipot Testers

LCR Meters

Cable Testers

DC Loads

DC Sources

Medical Systems

AC Sources

Megs/Millis

Ground Bond Testers

CaptivATE

Accessories

Refurbished Equipment

Productos de QuadTech

Product Tutorials

Service RMA Request




New and Improved Hybrid 2000 AC/DC/IR/DCR Safety Analyzer

SKU:
Hybrid 2000
Quantity:
 Each
 

Additional Images:  Front     Rear     Right

 

Description

The only hipot and 4 wire resistance meter on the market.

Why Buy?

  • Perform hipot & contact resistance testing with one instrument
  • Automatic switching for multi-point testing
  • Monitor resistance while checking intermittent connections
  • Insulation resistance testing up to 5000V DC

Features

  • New and improved DC resistance 2 or 4 wire
  • Substep function allows for secondary tests to be performed after failure
  • DC resistance temperature compensation
  • DCR Balance
  • AC Dielectric Withstand Voltage 50 to 5000VAC, Current to 30mA
  • DC Dielectric Withstand Voltage 50 to 6000VDC, Current to 10mA
  • IR Measurements from 1MΩ to 50GΩ, Test Voltage 50 to 5000VDC
  • DC Resistance Measurements from 50mΩ to 100kΩ
  • Real and Total Current Measurement
  • Built-in Scanner with 8 HV Output Channels for Multi-Point Testing
  • Programmable Hi/Lo Limits for Pass/Fail Testing
  • Ability to Perform Multiple Tests in Sequence
  • Internal Storage and Recall of 50 Test Setups, 20 Steps Each
  • Programmable Ramp, Dwell, Test and Fall Times
  • Open/Short Circuit Check to Ensure the Device is Connected
  • Pause Mode Allows the Operator to Change Device Connection & Continue
  • Front Panel Lockout Prevents Changes to the Test Setup
  • Automatic Offset to Zero Out Residual Current
  • Ground Fault Interrupt (GFI) for auto shutdown if current imbalance >0.5mA
  • RS232 Interface Included Standard
  • Built-In Operator Prompted Software Calibration Routine
  • CE Marked

Product Package

The following accessories come standard with the unit:

  • 150827 Hybrid 2000 Instruction Manual
  • 4200-0300 AC Power Cord
  • S02 HV Lead Set, 1 meter
  • 700100 Ground Continuity Lead
  • 630214: Unterminated HV Leads (Quantity: 8)
  • Calibration Certificate Traceable to NIST

Options

The following accessory options are available:

Resources


Spec Sheet
Request Info
Instruction Manual CaptivATE Software*
Labview
QuadTester - All Inclusive Demo Software
* 2 wire only 

Industries

  • Wire & Cable
  • Medical
  • Aero
  • Alt Energy

Applications

  • Telecom Wire Testing
  • Patient Lead Testing
  • Heater Element Safety Testing
  • Transformer Testing
  • Electric Motor Testing
  • Coil Testing
  • Switch Testing
Image Product SKU Price Quantity Add
RS-232 Cable (9 pin) - 630157 630157
Our Price:
$60.00 USD
High Voltage Lead Set (8), with clips, G1030S - G40   G40
Our Price:
$270.00 USD
HV Lead Set, high & low, 1m HV Lead w/ Starburst Connector (std w/unit) - S02   S02
Our Price:
$180.00 USD
High Voltage Lead, 1 meter, unterminated - S09   S09
Our Price:
$65.00 USD
High Voltage Lead, 2 meters, unterminated - S10   S10
Our Price:
$80.00 USD
Load Box, resistive - S12   S12
Our Price:
$300.00 USD
Load Box, custom resistors - S14   S14
Our Price:
$395.00 USD
IEEE-488/Handler: Hybrid 2000 - 850900 850900
Our Price:
$540.00 USD
Temperature Compensation Probe - 700250 700250
Our Price:
$345.00 USD
HV Lead Set - S02-02 S02-02
Our Price:
$275.00 USD
8 to 16 Channel Scanner 2000-AB
Our Price:
$2,195.00 USD
HV Lead Unterminated 630214
Our Price:
$60.00 USD

Home  Customer Support Contact Us Privacy Policy Shopping Cart Site Map
Copyright © 2007 QuadTech. All rights reserved. Site designed and maintained by Sagebridge Solutions