1900 Series Rack Mount - 2000-16

1900 RS-232 Cable (9pin) - 630158

Application Wizard with RS-232 Cable - 1900-WZD

IEEE Interface (for 7600 Plus) - 7000-22

1730T to 1320 Handler Cable
1730T to 1320 Handler Cable

Before / After Calibration Data - CAL
Before and After Data can be provided if needed. Before Data is obtained by measurements that are made using NIST traceable standards when the unit arrives prior to calibration. Once the unit is calibrated and any necessary adjustments are made, after data is obtained using the same standards and test conditions as the before data. (Calibration not included in price).

Banana/BNC to Kelvin Clip Leads - 1320-01  
Kelvin clip lead set to BNC (2 feet in length) for connecting the 1320 Bias Current Source to the device under test.

Calibration Kit for 1900 Series Testers - 950038
The Calibration Kit for 1900 Series Testers includes the 7000-09 and 800178.

BNC (4) Test Leads - 1320-02 
Four individual BNC to BNC cables (10 inches in length) for connecting the 1320 Bias Current Source to the measurement terminals on 1750 LCR Digibridge or 21/2200 Transformer Test System.

BNC (4) Lead Set, 16 in - 1320-03  
BNC to BNC cable set of 4 (16 inches in length) for connecting the 1320 Bias Current Source to the measurement terminals on a variety of LCR Meters.