Rack Mount Kit
Rack Mount Kit for LR2000, 1730, 1715

Before / After Calibration Data
Before and After Data can be provided if needed. Before Data is obtained by measurements that are made using NIST traceable standards when the unit arrives prior to calibration. Once the unit is calibrated and any necessary adjustments are made, after data is obtained using the same standards and test conditions as the before data. (Calibration not included in price).

Temperature Compensation Probe
PT100 Temperature Compensation Probe for use with the LR2000 Milliohmmeter Temperature Compensation Interface (P/N 700251). The PT100 TC Probe is six feet in length and rated for 100 degrees C maximum.

Temperature Compensation Interface
The Temperature Compensation Interface is used with the LR2000 Milliohmmeter to make automatic thermal compensation measurements from 0 to 100 degrees Centigrade. The TC interface displays the temperature in either degrees C or F. The TC interface includes the GPIB (IEEE-488) and Handler interfaces. 

IEEE Interface (factory installed)  
Provides IEEE-488 (standard digital interface for programmable instruments) through 24 pin rear panel connector on the 1880. Interface is factory installed when ordered with the unit.

Cable Connector  
Five pin connector which mates with the 1880 front panel TEST connection. Allows for custom connections to the device under test in place of the standard Kelvin clip lead set.

Test Fixture & Cable Set  
Four-terminal test fixture with 1 meter cable provide a means of connecting to most axial and radial-leaded components. Includes two axial lead test clips.

IEEE Interface (field retrofit)  
Provides IEEE-488 (standard digital interface for programmable instruments) through 24 pin rear panel connector on the 1880. Interface can be retrofit in the field when added to the unit and some later time.

Kelvin Clip Lead Set 
Four-terminal lead set with 2 Kelvin clips for connecting to the device under test. One meter in length. Included standard with unit.