Before / After Calibration Data
Before and After Data can be provided if needed. Before Data is obtained by measurements that are made using NIST traceable standards when the unit arrives prior to calibration. Once the unit is calibrated and any necessary adjustments are made, after data is obtained using the same standards and test conditions as the before data. (Calibration not included in price).

Kelvin Cable Set  
Four-terminal BNC lead set (1 meter in length) with 2 Kelvin clips for connecting to the transformer under test. Used for single tests applications when not using the 2100-01 Matrix Scanner. Included standard with unit.

Turns Ratio Cable Set  
Two-terminal BNC lead set (1 meter in length) with 2 alligator clips for connecting to the transformer under test for turns ratio measurements. Used for single tests applications (along with the 2100-02 Kelvin Clips) when not using the 2100-01 Matrix Scanner. Included standard with unit. Included standard with unit.

Matrix Test Fixture: Spacing: 7.5 – 5.0mm PCB Thic  
Matrix scanner test fixture for adapting to transformers with spacing of 7.5mm - 5.0mm, thickness of 2.4mm. Spacing repeats over 20 pins, lead length must exceed thickness specified. The 2100-05 is the only fixture included standard with the 2100-01 Matrix Scanner. Contact factory for additional information.

Configuration Software (DOS format)  
Optional software package which allows test setups to be downloaded to the 21/2200 and measurement data to be uploaded to a PC using DOS operating software. On 3 ½” disk.

Matrix Test Fixture: Spacing: 3.5 – 3.5mm PCB Thickness : 3.2mm  
Optional matrix scanner test fixture for adapting to transformers with spacing of 3.5mm - 3.5mm, thickness of 3.2mm. Spacing repeats over 20 pins, lead length must exceed thickness specified. Contact factory for additional information.

Matrix Test Fixture: Spacing: 3.8 – 3.8mm PCB Thickness : 3.2mm  
Optional matrix scanner test fixture for adapting to transformers with spacing of 3.8mm - 3.8mm, thickness of 3.2mm. Spacing repeats up to 20 pins, lead length must exceed thickness specified. Contact factory for additional information.

Matrix Test Fixture: Spacing: 3.81 – 5.08 – 3.81mm PCB Thickness : 2.4mm  
Optional matrix scanner test fixture for adapting to transformers with spacing of 3.81mm - 5.05mm – 3.81mm, thickness of 2.4mm. Spacing repeats over 8 pins, lead length must exceed thickness specified. Contact factory for additional information.

Matrix Test Fixture: Spacing: 4.0 – 4.0mm PCB Thickness : 2.4mm  
Optional matrix scanner test fixture for adapting to transformers with spacing of 4.0mm - 4.0mm, thickness of 2.4mm. Spacing repeats over 20 pins, lead length must exceed thickness specified. Contact factory for additional information.

Matrix Test Fixture: Spacing: 4.0 – 5.0mm PCB Thickness : 2.4mm  
Optional matrix scanner test fixture for adapting to transformers with spacing of 4.0mm - 5.0mm, thickness of 2.4mm. Spacing repeats over 18 pins, lead length must exceed thickness specified. Contact factory for additional information.