Description
The Sentinel III-12 System provides complete Electrical Safety Testing to IEC60601-1 and IEC60601-2-49 (Multi-functional Patient Monitoring Equipment). This system saves time by scanning patient connections for leakage current without powering down the medical device. The Sentinel III-12 System's soft start/stop capability permits PC-based medical devices to boot up/shut down before starting leakage tests and removing mains power.
The Sentinel III-12 System Configuration can accommodate Class I, Class II and internally-powered medical devices with the following specifications:
- Mains power input up to 1500VA, 0-300Vac @ 15-1kHz
- Up to 12 B, BF or CF patient connections
- Up to 4 Signal Inputs/Signal Outputs (SIP/SOP)
Reduce Operator Intervention: F-Type leakage current, mains-to-patient hipot, multi-point hipot and ground bond tests can be performed without the need for operator to connect/disconnect cables during the tests. The operator does not need to make P/F judgments, record test results, make process deviations, select the test or interface with multiple pieces of test equipment.
1500VA Programmable AC Source: Provides the capability to perform earth (line), enclosure or patient leakage current measurements at different mains voltages and frequencies.
CaptivATE provides the Sentinel III-12 System with the capability to: create test sequences, capture data, bar code scanning of device model and serial number, and automatic recall of test setup based upon model number. All test data is saved into a database for trending and analysis.
Why Buy?
- Complete electrical safety testing to IEC 60601-1 & IEC 60601-2-49
- Automatically test multiple patient (applied part) connections
- Improve compliance with quality system regulations (ISO 13485, FDA 21CFR)
- Consolidate test processes & decrease number of test instruments
Features
- Guardian 6100 Plus,CaptivATE,1500VA AC Source, Matrix 8000 Scanning System
- Testing to IEC 60601-1 & IEC 60601-2-49
- F-Type LC (Mains-on-Applied-Part)
- Multi-Point Hipot, GB and LC Testing
- Up to 12 Patient (Applied Part) Connections
- Power-Up Computerized Devices
- Device Stays Powered-On During Scanning
- Control AC Line Voltage & Frequency
- G6100 Plus Tests: AC, DC, IR, GB & LC
- LC Tests: Earth, Enclosure, Patient & Patient Auxiliary
- LC Scanner: 20A Input Current Capability
- Functional Run Testing
- CaptivATE Automation Software
- User Name/Password Protection
- 3 Levels of Administrator-Controlled Access to the System
- Barcode Scan Model & Serial Numbers
- Create, Edit and Store Unlimited Test Sequences
- Association of Test Sequences to Unique UUT Models or ID Numbers
- Historical Data Querying Tools
- Capture, Archive & Print Test Parameters, Results & Reports
- Electronic Test Records
Accessories
The following accessories come standard with the unit:
- G6100 Plus
- CaptivATE Software
- 61603 1500VA AC Source
- Matrix 8000 Scanning System
- (1) AC Line Module
- (1) GBF-2 Module
- (1) Earth Module
- (1) AC Line 2 Module
- (3) General Modules
- (1) Blank Module
- (2) G32 Isolation Transformers
- (1) G42 Barcode Scanner
- (3) RS-232 Cables
- (2) USB - RS-232 Adapters
- Cables, Adapters req'd for DUT
Options
The following options are available:
|
|
