Description
The Sentinel III-16 System provides complete Electrical Safety Testing to IEC60601-1 and IEC60601-2-49 (Multi-functional Patient Monitoring Equipment). This system saves time by scanning patient connections for leakage current without powering down the medical device. The Sentinel III-16 System's soft start/stop capability permits PC-based medical devices to boot up/shut down before starting leakage tests and removing mains power.
The Sentinel III-16 System Configuration can accommodate Class I, Class II and internally-powered medical devices with the following specifications:
-
Mains power input up to 1500VA, 0-300Vac @ 15-1kHz
-
Up to 12 B, BF or CF patient connections
-
Up to 4 Signal Inputs/Signal Outputs (SIP/SOP)
Reduce Operator Intervention: F-Type leakage current, mains-to-patient hipot, multi-point hipot and ground bond tests can be performed without the need for operator to connect/disconnect cables during the tests. The operator does not need to make P/F judgments, record test results, make process deviations, select the test or interface with multiple pieces of test equipment.
1500VA Programmable AC Source: Provides the capability to perform earth (line), enclosure or patient leakage current measurements at different mains voltages and frequencies.
CaptivATE provides the Sentinel III-16 System with the capability to: create test sequences, capture data, bar code scanning of device model and serial number, and automatic recall of test setup based upon model number. All test data is saved into a database for trending and analysis.
Why Buy?
-
Complete electrical safety testing to IEC 60601-1 & IEC 60601-2-49
-
Automatically test multiple patient (applied part) connections
-
Improve compliance with quality system regulations (ISO 13485, FDA 21CFR)
-
Consolidate test processes & decrease number of test instruments
Features
-
Guardian 6100 Plus,CaptivATE,1500VA AC Source, Matrix 8000 Scanning System
-
Testing to IEC 60601-1 & IEC 60601-2-49
-
F-Type LC (Mains-on-Applied-Part)
-
Multi-Point Hipot, GB and LC Testing
-
Up to 16 Patient (Applied Part) Connections
-
Power-Up Computerized Devices
-
Device Stays Powered-On During Scanning
-
Control AC Line Voltage & Frequency
-
G6100 Plus Tests: AC, DC, IR, GB & LC
-
LC Tests: Earth, Enclosure, Patient & Patient Auxiliary
-
LC Scanner: 20A Input Current Capability
-
Functional Run Testing
-
CaptivATE Automation Software
-
User Name/Password Protection
-
3 Levels of Administrator-Controlled Access to the System
-
Barcode Scan Model & Serial Numbers
-
Create, Edit and Store Unlimited Test Sequences
-
Association of Test Sequences to Unique UUT Models or ID Numbers
-
Historical Data Querying Tools
-
Capture, Archive & Print Test Parameters, Results & Reports
-
Electronic Test Records
Accessories
The following accessories come standard with the unit:
-
G6100 Plus
-
CaptivATE Software
-
61603 1500VA AC Source
-
Matrix 8000 Scanning System
-
(1) AC Line Module
-
(1) GBF-2 Module
-
(1) Earth Module
-
(1) AC Line 2 Module
-
(4) General Modules
-
(0) Blank Modules
-
(2) G32 Isolation Transformers
-
(1) G42 Barcode Scanner
-
(3) RS-232 Cables
-
(2) USB - RS-232 Adapters
-
Cables, Adapters req'd for DUT
Options
The following options are available:
|
|
