The 31000 Series AC power source has state-of-the-art PWM technology and this programmable power supply has power factor correction circuits. The AC power source series yields higher efficiency and delivers more programmable power supply output power. Programmable power supplies are capable of delivering up to 6 times of peak current compared to its maximum rated current making it ideal for devices with high inrush current. The AC+DC modes extend the applications to not only pure AC voltage but AC testing with DC offset for laboratory applications. Advanced DSP technology enables precise and high speed AC power source measurements such as RMS voltage, RMS current, true power, frequency, power factor, and current crest factor.

Software is available for control and data acquisition in laboratory applications for QuadTech’s programmable power supplies. The 31015, 31020 and 31040 programmable power supplies have been integrated into QuadTech’s CaptivATE Automation Software for use in production line applications such as functional run tests, line leakage testing in combination with electrical safety testing including ground bond, continuity and hipot. The 31000 Series Programmable AC power source is an excellent alternative to Elgar’s Continuous Wave Programmable Supplies Series.

31000A Programmable AC Power Source and Programmable Power Supply

The A Series adds a transient generator for power line disturbance simulation waveform synthesis.

31120/31180 High Power Single and Three Phase AC Power Source

QuadTech, Inc’s. AC 31120/31180 series of single and three phase selectable AC programmable power supplies delivers the right solution to simulate all kinds of normal/abnormal input conditions and measures the critical characteristics of the products under test. The 31120/31180 Series can deliver maximum output power from 0 - 300Vac and a frequency between 15Hz to 1500Hz. The AC+DC programmable power supplies extend the applications not only for pure AC voltage, but for DC transient applications as well. The programmable AC power source is capable of delivering up to four times the peak current compared to its maximum rated current that makes it ideal for inrush current testing. All AC programmable power supply can generate very clean sine waveform output with typical distortion less than 0.5%@50/60Hz. The 31120A/31180A AC programmable power supplies add an additional transient generator to provide waveform synthesis and programmable AC power source impendence. This makes them ideal for testing to MIL-STD-704 and DO160 for military and aerospace applications.

33000 Series Programmable AC Power Source